Layout Table~~~~679~679~~

Landmarka Transmitter - OEM module~Landmarka OEM transmitter is a Snap-on DIN-rail mounted modular radio telemetry system for OEMs and system builders. The transmitter has capacity for 8 contact inputs, 2 pulse inputs and 2 current or voltage inputs at 10bit resolution.

The units can be rapidly integrated into most control or monitoring task using snap EN 50/022/035/045 rails. Radio channel frequency can be changed by on-board switches if required, and units are available to suit various low-power telemetry bands.

  ~~P3731.2 TX oem 458MHz 10mW|381|P3731.1 TX oem 433MHz 10mW|382|P3731.3 TX oem 867MHz 10mW|470|P3733.3 TX oem 878MHz 500mW|471|P3733.2 TX oem 458MHz 500mW|472|P3733.1 TX oem 433MHz 500mW|473|~679~667~TX transmitter OEM module radio telemetry LANDMARKA DIN RF 500mW 10mW UHF 433 458 MHz~

Landmarka Receiver - OEM module~Landmarka OEM receiver is a Snap-on DIN-rail mounted modular radio telemetry system for OEMs and system builders. The receiver has the capacity to handle two Landmarka transmitters and can be expanded to accommodate up to 16 transmitters in total. Each receiver module has the capacity for two sets of 8 contact outputs, 2 pulse outputs and 2 current or voltage outputs at 10bit resolution. This includes isolated current output and loop power supplies as standard

The units can be calibrated on site without the use of a laptop or PC.

The units can be rapidly integrated into most control or monitoring task using snap EN 50/022/035/045 rails. Radio channel frequency can be changed by on-board switches if required, and units are available to suit various low-power telemetry bands.

  ~~P3732.2 RX oem 458MHz|383|P3732.1 RX oem 433MHz|458|P3732.3 RX oem 867MHz|474|~679~673~RX receiver OEM module radio telemetry LANDMARKA DIN RF 500mW 10mW UHF 433 458 MHz~

Landmarka 2 channel output extension~Using this module the Landmarka system can provide outputs for another two Landmarka transmitters. This offers unrivalled flexibility for OEMs and system builders. Up to 8 of these units can be driven from a basic Landmarka receiver providing up to a 16 transmitter system. Snap-on DIN-rail compatibility ensures easy and rapid installation and simple configuration. Each expansion module has the capacity to provide two sets of 8 contact outputs, 2 pulse outputs and 2 current or voltage outputs at 10bit resolution. This includes isolated current output and loop power supplies as standard

  ~~P3735.0 2 channel output extension|385|~679~675~RX receiver expansion pod OEM module radio telemetry LANDMARKA DIN RF 500mW 10mW UHF 433 458 MHz~

Landmarka Communications Module~This module provides the core of any Landmarka receiver system. It acts as an intelligent processor for all the relevant radio signals in the system. It can act as a standalone interface to other intelligent devices such as PLCs or wide area telemetry systems, or it can interface with up to 8 output modules in order to mimic the hardware of 16 LANDMARKA Transmitters.The communication module has a radio receiver, digital signal processor and a powerful user interface. A MODBUS serial interface is also provided.. Snap-on DIN-rail compatibility ensures easy and rapid installation and simple configuration.

  ~~P3734.2 458MHz Communications Module|459|P3734.1 433MHz Communications Module|461|P3734.3 867MHz Communications Module|475|~679~831~~

PSU 120/240Vac module~Mains power can be supplied for receivers, transmitters and instruments using these snap-on DIN rail mounting PSUs. If isolated current loops are required then these units provide an economic and rapid solution

  ~~P3736.1 PSU Transmitter 120/240Vac|386|P3736.2 PSU Receiver 120/240Vac|387|~679~685~PSU DIN rail 24V TX RX supply power~

Antenna~

Click to select a suitable ~~~679~720~~