Layout Table~~~~596~596~~

Alarm display units and panels~

Our operation alarm panels are designed for industrial and shipping applications, offering rugged yet simple interfacing whilst presenting information in a clear and concise format.

Manufactured in Sweden they provide a quality solution for panel and system builders alike.

All panels have multiple protection schemes for incorrect or accidental connections, and they can be run of a variety of power supplies

~~~596~724~~

LLD 10/15 cascadable DIN rail alarm panels~Designed specifically for DIN rail based systems, the LLD units are supplied as a master and then the system can be extended using slave modules. Each master unit provides alarm detection and indication for 10 inputs. This can be expanded using up to 6 slave units each with a capacity of 15 inputs, thus providing a total capacity system of 100 inputs.

All inputs are programmable to be normally open/closed; independent time delays for 50ms to 70s, and can be assigned to grouped output alarm relays

~~LLD10M 10 input master|400|LLD15S 15 input slave|401|~596~728~~

LLC 10 24V IP65~A universal panel for process and machine manufacturers. Conforming to DIN 144x144x35mm panel format the LLC 10 provides a compact solution for monitoring and displaying 10 inputs signals and providing 2 alarm group outputs.

All inputs are programmable to be normally open/closed; independent time delays for 500ms to 20s, and offer a variety of system health features such as TEST functions, running lights and voltage failure indications

They are suitable for panel, wall or cabinet mounting and provide easy wiring using detachable screw terminals

~~LLC 10 24V IP65|402|~596~730~~

LLC RF, Relayboard for LLC 10~An isolated interface between the LLC10 alarm panel and remote control room PLCs or computers. This is an accessory pcb which fits onto the back of an LLC 10 alarm panel.

When a fault condition occurs the relay card activates a corresponding changeover relay. The relay remains active until the fault is corrected and the alarm has been acknowledged.

As with all alarm panel products various protection methods are used to accommodate incorrect connection and electrical interference.

~~LLCRF relayboard|403|~596~732~~

Diantek SOL2~The SOL range of operation and alarm panels from Diantek provide a modular panel alarm solution for OEMs and system builders. Their easy installation and simple visual layout provide a reliable high quality local information point. Each unit can be individually programmed with NO/NC contacts and time delays from 3s to 300s.

Each panel can handle 10 inputs. The master unit can have up to 8 slave panels thus providing a maximum of 90 inputs per system.

~~SOL2.102 Master Panel|404|SOL2.10 Slave Panel|405|SOL2.102.4 Combination panel|406|~596~734~~

Diantek SOL1.10D~The SOL Operation Indicator Panel is a module designed to replace all conventional signal lamps in equipment or control panels. Its format conforms with the Diantek SOL2 modules and provides for a neat, clear presentation of system status for quality system builders.

Each panel can handle 10 inputs which are displayed as yellow LEDs. A test function is included.

~~SOL1.10D Operation indicator|407|~596~736~~